sunxi: Set AHB1 clock to PLL6/3 on all clock_sun6i.h using SoCs

According to the datasheets the max speed of AHB1 is 276 MHz, so
setting it to PLL6 / 3 which gives us 200MHz everywhere is fine,
and gives us a nice speed-up in certain workloads.

Suggested-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Ian Campbell <[email protected]>
Tested-by: Chen-Yu Tsai <[email protected]>

diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 09337a1deaf9b4670c8f0f7406c5a350f5423c13..5c762751126e4cdefd7f72065a2134b9f05486d8 100644 (file)
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -220,11 +220,7 @@ struct sunxi_ccm_reg {
 #define CCM_PLL11_CTRL_UPD             (0x1 << 30)
 #define CCM_PLL11_CTRL_EN              (0x1 << 31)
 
-#if defined CONFIG_MACH_SUN8I_H3
 #define AHB1_ABP1_DIV_DEFAULT          0x00003180 /* AHB1=PLL6/3,APB1=AHB1/2 */
-#else
-#define AHB1_ABP1_DIV_DEFAULT          0x00002020 /* AHB1=AXI/4, APB1=AHB1/2 */
-#endif
 
 #define AXI_GATE_OFFSET_DRAM           0